20 Jul

Iwata Professional Airbrush Maintenance Tools

Iwata Professional Airbrush Maintenance Tools Iwata Professional Airbrush Maintenance Tools provide the ultimate airbrush maintenance experience to users. Included in the Iwata Professional Airbrush Maintenance Tools are: Iwata Soft Jaw Pliers, Iwata Air Valve Guide Wrench, Iwata Needle Packing Screw Drivers (1.2mm and 1.4mm) and the Iwata Nozzle Wrench. Iwata Needle Packing Screw Drivers (1.2 mm, 1.4 mm): Easily remove, assemble and adjust the airbrush needle packing set (needle packing screw and packing) with the Iwata Needle Packing Screw Drivers. The needle packing set prevents paint from back-flowing into the main lever mechanism and is used to adjust the sliding tension of the needle. To remove the needle packing set, choose the appropriate screw driver (see list below). The screw driver pin size is the same diameter as the needle. With the airbrush disassembled, insert the screw driver into the back of the airbrush body until it connects with the needle packing screw as shown. Slowly turn the screw driver to engage the slots in the needle packing screw and unscrew. The packing set should be on the screw driver pin when removed or it may have fallen into the airbrush body. To assemble, place the needle packing set onto the pin of the screw driver, engaging the slots. Slowly insert through the back of the airbrush body until the needle packing screw is seated and gently tighten. To adjust the needle tension, slide the pin slowly back and forth (to feel the tension) while tightening or loosening the screw. The 1.2mm Screw Driver fits: Custom Micron Series — CM-B, CM-C, CM-SB, CM-C Plus; Hi-Line Series — HP-AH, HP-BH; High Performance Plus Series — HP-A Plus, HP-B Plus, HP-SB Plus; High Performance Series — HP-A, HP-B, HP-SB; Revolution Series — HP-AR, HP-BR, HP-TR2; Kustom Series — Micron CM; NEO for Iwata — CN, BCN. The 1.4mm Screw Driver fits: Hi-Line Series — HP-CH, HP-TH; High Performance Plus Series — HP-C Plus, HP-BC Plus, HP-BC1P; High Performance Series— HP-C, HP-BC, HP-BC2; Eclipse Series — HP-BS, HP-CS, HP-BCS, HP-SBS; Revolution Series — HP-CR, HP-BCR, HP-SAR, HP-TR1; Kustom Series — Eclipse CS, Hi-Line CH, Revolution TR, HP-TH; NEO for Iwata — TRN1, TRN2. Iwata Soft Jaw Pliers: Use these specialized pliers to assemble or disassemble your airbrush. The nylon jaw inserts grip firmly without damaging the chrome surface. Replacement inserts are available. Iwata Air Valve Guide Wrench: Select the small or large diameter end of the Iwata Air Valve Guide Wrench for your specific airbrush model (see list). For air valve replacement, fit the wrench into the two slots of the air valve guide and unscrew. Remove and replace the air valve and reassemble. To customize the main lever spring tension, simply loosen or tighten the air valve guide. The Small diameter end is used for: Custom Micron Series — CM-B, CM-C, CM-SB, CM-C Plus; Hi-Line Series — HP-AH, HP-BH, HP-CH, HP-TH; High Performance Plus Series — HP-A Plus, HP-B Plus, HP-C Plus, HP-BC Plus, HP-SB Plus, HP-BC1P; High Performance Series — HP-A, HP-B, HP-C, HP-BC, HP-BC2, HP-SB; Revolution Series — HP-TR1, HP-TR2; Kustom Series — Hi-Line CH, Micron CM, Revolution TR, HP-TH. The Large diameter end is used for: Eclipse Series — HP-BS, HP-CS, HP-BCS, HP-SBS; Kustom Series ­— Eclipse CS; Revolution Series — HP-AR, HP-BR, HP-CR, HP-BCR, HP-SAR. Does not fit NEO for Iwata Series airbrushes. Iwata Nozzle Wrench: The self-centering Iwata Nozzle Wrench is used to remove or tighten the nozzle onto the airbrush body without the risk of over-tightening. Does not fit the Iwata Eclipse Series airbrushes and the NEO for Iwata TRN2 side-feed trigger airbrush. Iwata Professional Airbrush Maintenance Tools Iwata Professional Airbrush Maintenance Tools CL500 Iwata Professional Airbrush Maintenance Tools Iwata Professional Airbrush Maintenance Tools provide the ultimate airbrush maintenance experience to users. Included in the Iwata Professional Airbrush Maintenance Tools are: Iwata Soft Jaw Pliers, Iwata Air Valve Guide Wrench, Iwata Needle Packing Screw Drivers (1.2mm and 1.4mm) and the Iwata Nozzle Wrench. Iwata Needle Packing Screw Drivers (1.2 mm, 1.4 mm): Easily remove, assemble and adjust the airbrush needle packing set (needle packing screw and packing) with the Iwata Needle Packing Screw Drivers. The needle packing set prevents paint from back-flowing into the main lever mechanism and is uséd to adjust the sliding tension of the needle. To remove the needle packing set, choose the appropriate screw driver (see list below). The screw driver pin size is the same diameter as the needle. With the airbrush disassembled, insert the screw driver into the back of the airbrush body until it connects with the needle packing screw as shown. Slowly turn the screw driver to engage the slots in the needle packing screw and unscrew. The packing set should be on the screw driver pin when removed or it may have fallen into the airbrush body. To assemble, place the needle packing set onto the pin of the screw driver, engaging the slots. Slowly insert through the back of the airbrush body until the needle packing screw is seated and gently tighten. To adjust the needle tension, slide the pin slowly back and forth (to feel the tension) while tightening or loosening the screw. The 1.2mm Screw Driver fits: Custom Micron Series — CM-B, CM-C, CM-SB, CM-C Plus; Hi-Line Series — HP-AH, HP-BH; High Performance Plus Series — HP-A Plus, HP-B Plus, HP-SB Plus; High Performance Series — HP-A, HP-B, HP-SB; Revolution Series — HP-AR, HP-BR, HP-TR2; Kustom Series — Micron CM; NEO for Iwata — CN, BCN. The 1.4mm Screw Driver fits: Hi-Line Series — HP-CH, HP-TH; High Performance Plus Series — HP-C Plus, HP-BC Plus, HP-BC1P; High Performance Series— HP-C, HP-BC, HP-BC2; Eclipse Series — HP-BS, HP-CS, HP-BCS, HP-SBS; Revolution Series — HP-CR, HP-BCR, HP-SAR, HP-TR1; Kustom Series — Eclipse CS, Hi-Line CH, Revolution TR, HP-TH; NEO for Iwata — TRN1, TRN2. Iwata Soft Jaw Pliers: Use these specialized pliers to assemble or disassemble your airbrush. The nylon jaw inserts grip firmly without damaging the chrome surface. Replacement inserts are available. Iwata Air Valve Guide Wrench: Select the small or large diameter end of the Iwata Air Valve Guide Wrench for your specific airbrush model (see list). For air valve replacement, fit the wrench into the two slots of the air valve guide and unscrew. Remove and replace the air valve and reassemble. To customize the main lever spring tension, simply loosen or tighten the air valve guide. The Small diameter end is uséd for: Custom Micron Series — CM-B, CM-C, CM-SB, CM-C Plus; Hi-Line Series — HP-AH, HP-BH, HP-CH, HP-TH; High Performance Plus Series — HP-A Plus, HP-B Plus, HP-C Plus, HP-BC Plus, HP-SB Plus, HP-BC1P; High Performance Series — HP-A, HP-B, HP-C, HP-BC, HP-BC2, HP-SB; Revolution Series — HP-TR1, HP-TR2; Kustom Series — Hi-Line CH, Micron CM, Revolution TR, HP-TH. The Large diameter end is uséd for: Eclipse Series — HP-BS, HP-CS, HP-BCS, HP-SBS; Kustom Series ­— Eclipse CS; Revolution Series — HP-AR, HP-BR, HP-CR, HP-BCR, HP-SAR. Does not fit NEO for Iwata Series airbrushes. Iwata Nozzle Wrench: The self-centering Iwata Nozzle Wrench is uséd to remove or tighten the nozzle onto the airbrush body without the risk of over-tightening. Does not fit the Iwata Eclipse Series airbrushes and the NEO for Iwata TRN2 side-feed trigger airbrush. Iwata Professional Airbrush Maintenance Tools Iwata Professional Airbrush Maintenance Tools provide the ultimate airbrush maintenance experience to users. Included in the Iwata Professional Airbrush Maintenance Tools are: Iwata Soft Jaw Pliers, Iwata Air Valve Guide Wrench, Iwata Needle Packing Screw Drivers (1.2mm and 1.4mm) and the Iwata Nozzle Wrench. Iwata Needle Packing Screw Drivers (1.2 mm, 1.4 mm): Easily remove, assemble and adjust the airbrush needle packing set (needle packing screw and packing) with the Iwata Needle Packing Screw Drivers. The needle packing set prevents paint from back-flowing into the main lever mechanism and is uséd to adjust the sliding tension of the needle. To remove the needle packing set, choose the appropriate screw driver (see list below). The screw driver pin size is the same diameter as the needle. With the airbrush disassembled, insert the screw driver into the back of the airbrush body until it connects with the needle packing screw as shown. Slowly turn the screw driver to engage the slots in the needle packing screw and unscrew. The packing set should be on the screw driver pin when removed or it may have fallen into the airbrush body. To assemble, place the needle packing set onto the pin of the screw driver, engaging the slots. Slowly insert through the back of the airbrush body until the needle packing screw is seated and gently tighten. To adjust the needle tension, slide the pin slowly back and forth (to feel the tension) while tightening or loosening the screw. The 1.2mm Screw Driver fits: Custom Micron Series — CM-B, CM-C, CM-SB, CM-C Plus; Hi-Line Series — HP-AH, HP-BH; High Performance Plus Series — HP-A Plus, HP-B Plus, HP-SB Plus; High Performance Series — HP-A, HP-B, HP-SB; Revolution Series — HP-AR, HP-BR, HP-TR2; Kustom Series — Micron CM; NEO for Iwata — CN, BCN. The 1.4mm Screw Driver fits: Hi-Line Series — HP-CH, HP-TH; High Performance Plus Series — HP-C Plus, HP-BC Plus, HP-BC1P; High Performance Series— HP-C, HP-BC, HP-BC2; Eclipse Series — HP-BS, HP-CS, HP-BCS, HP-SBS; Revolution Series — HP-CR, HP-BCR, HP-SAR, HP-TR1; Kustom Series — Eclipse CS, Hi-Line CH, Revolution TR, HP-TH; NEO for Iwata — TRN1, TRN2. Iwata Soft Jaw Pliers: Use these specialized pliers to assemble or disassemble your airbrush. The nylon jaw inserts grip firmly without damaging the chrome surface. Replacement inserts are available. Iwata Air Valve Guide Wrench: Select the small or large diameter end of the Iwata Air Valve Guide Wrench for your specific airbrush model (see list). For air valve replacement, fit the wrench into the two slots of the air valve guide and unscrew. Remove and replace the air valve and reassemble. To customize the main lever spring tension, simply loosen or tighten the air valve guide. The Small diameter end is uséd for: Custom Micron Series — CM-B, CM-C, CM-SB, CM-C Plus; Hi-Line Series — HP-AH, HP-BH, HP-CH, HP-TH; High Performance Plus Series — HP-A Plus, HP-B Plus, HP-C Plus, HP-BC Plus, HP-SB Plus, HP-BC1P; High Performance Series — HP-A, HP-B, HP-C, HP-BC, HP-BC2, HP-SB; Revolution Series — HP-TR1, HP-TR2; Kustom Series — Hi-Line CH, Micron CM, Revolution TR, HP-TH. The Large diameter end is uséd for: Eclipse Series — HP-BS, HP-CS, HP-BCS, HP-SBS; Kustom Series ­— Eclipse CS; Revolution Series — HP-AR, HP-BR, HP-CR, HP-BCR, HP-SAR. Does not fit NEO for Iwata Series airbrushes. Iwata Nozzle Wrench: The self-centering Iwata Nozzle Wrench is uséd to remove or tighten the nozzle onto the airbrush body without the risk of over-tightening. Does not fit the Iwata Eclipse Series airbrushes and the NEO for Iwata TRN2 side-feed trigger airbrush. eBay integration by

Continue reading

20 Jul

Smooth-On Smooth-Cast 300 Liquid Plastic Compound Smooth-Cast 300 Casting Resin

Smooth-On Smooth-Cast 300 Liquid Plastic Compound Smooth-Cast 300 Casting Resin PRODUCT DETAILS: Smooth Cast 300 is a liquid plastic ,ultra-low viscosity casting resin that yields castings that are bright white and virtually bubble-free. Vacuum degassing is not necessary. It offers the convenience of a one to one mix ratio (by volume). 3 minute pot life: 10 minute demold time: Mixed viscosity 80 cps: 70D shore hardness Fully cured castings are tough, durable, machinable and paintable. Read MSDS before use – Adult Supervision Required. Keep Out of the Reach of Children – for more information visit Features: Ultra-low viscosity casting resin with bright white color Vacuum degassing is not necessary to yield castings that are virtually bubble free. Pot Life: 3 minutes; Cure Time: 10 minutes Shore 70D Mix Ratio: 1A: 1B by Volume PAYMENT SHIPPING RETURNS We only accept payment through PayPal. This is to ensure that all of our buyers qualify for eBay Buyer Protection. Most orders are shipped within 1-2 business days with standard shipping and tracking. A tracking number will be posted as soon as the item has shipped. Please make sure to provide the correct shipping address during checkout as the address cannot be changed afterwards. We are not responsible for any incorrect or undeliverable addresses. We do not ship to PO/APO Boxes. We offer easy returns on most items within 30 days of delivery for a full refund.

Continue reading

20 Jul

Robart 411 Paint / Polish Shaker with AC Power Supply for 1/4 oz to 1 oz Bottles

Shipping InformationAll shipping prices listed are for the continental US only. We will ship to APO/FPO, Alaska, Hawaii, Puerto Rico, Virgin Islands, and Guam. But please e-mail (include item number) for a quote before purchasing. We no longer ship to or accept payments from outside the US. Most larger items/purchases are shipped via FedEx Ground, and shipping in the continental US usually takes 2-5 business days. This varies occasionally. Smaller items will ship by US Mail, which usually takes 1-5 days, but can also vary. Combined Shipping & FREE SHIPPING Over $199!We offer discounted shipping charges on multiple item orders that are purchased through the eBay shopping cart. Shipping is charged at the single highest shipping rate of all items purchased, then free for all additional items. We also offer FREE SHIPPING ON ORDERS OVER $199 shipped within the 48 contiguous states. To qualify for the discounted shipping, all items must be paid for with a single payment. Robart 411 Paint / Polish Shaker with AC Power Supply for 1/4 oz to 1 oz Bottles ROB411 This is the Robart Hobby Paint Shaker Machine with AC Power Adapter. The paint shaker will blend paints at 5000 shakes per minute, and is designed to hold 1/4 oz to 1 ounce bottles. This is a must-have item for serious RC airplane, car, truck, and boat hobbyists doing any paint work.Features Shakes paint better than by hand! Operates at 5000 shakes per minute. Perfectly blends paints for smooth application with brush or spray equipment. For use with 1/4oz to 1oz paint bottles. Electrically powered. A rubber strap holds the bottle in place. Foam pads on the bottom protect surfaces. On/off button. Limited warranty.IncludesOne Paint Shaker with AC Power SupplyRequires110-120V AC Power All items are brand new in the factory package, with the full manufacturer warranty.Be sure to visit our eBay Store for many other items at the great prices we are known for! If you have any questions about the item or ordering, please feel free to contact us! Payment InformationWe accept payment by PayPal, and Visa, MasterCard, and Discover credit cards. If you have special instructions or questions, please contact us through eBay messages prior to ordering. Please do not use the order notes section to ask questions. Once the payment is received the order will be processed as-is. Shipping InformationAll shipping prices listed are for the continental US only. We will ship to APO/FPO, Alaska, Hawaii, Puerto Rico, Virgin Islands, and Guam. But please e-mail (include item number) for a quote before purchasing. We no longer ship to or accept payments from outside the US. Most larger items/purchases are shipped via FedEx Ground, and shipping in the continental US usually takes 2-5 business days. This varies occasionally. Smaller items will ship by US Mail, which usually takes 1-5 days, but can also vary. Combined Shipping & FREE SHIPPING Over $199!We offer discounted shipping charges on multiple item orders that are purchased through the eBay shopping cart. Shipping is charged at the single highest shipping rate of all items purchased, then free for all additional items. We also offer FREE SHIPPING ON ORDERS OVER $199 shipped within the 48 contiguous states. To qualify for the discounted shipping, all items must be paid for with a single payment. Sales TaxSales tax is charged where we are required by law. You may be required by your local tax authorities to remit use tax on online purchases. Contacting UsIf you have any questions about your purchases or any of our items, feel free to contact us using the “Ask seller a question” link at the top of the page. Thank you for shopping at rcsuperstore!

Continue reading